-
1U 19" rackmount,
available in Beige ECR9102 or Black ECR9102B.
-
Thick and heavy coated metal. Laser cut
high quality production.
-
1 x 32Bit PCI riser card included.Ask
for other type of riser card (64Bit, Flexible riser card).
-
1 efficient blower fan included
-
With 250W PSU ref P1G-6250P from Zippy. 20pin,
4Molex, 2Floppy. Ask for additional connectors.
-
Takes Micro ATX and ATX boards (NOT extended ATX).
-
Slide in Motherboard plate for easy
installation
-
Full set electro-plate anti-rust
processing.
-
Meet CE, FCC requirements.
-
Tool free design.
-
Optional Rail set for installation in
cabinet. Rail Reference SLR3500.
-
Optional Slim CD-ROM+FDD Bracket. Place a Slim CD-ROM & an FDD (or HDD) in the 5.25" front bay. Supplied with
an "SCR-242 to 40Pin IDE adaptor" to convert the Slim CD_ROM
connector to a standard 40pin IDE connector.
-
Limited types of Back Windows available
(See pictures above).
-
This chassis is too low
to take the standard 4.5x16cm I/O shield provided with Motherboards.
-
Check compatibility between your
Motherboard and one of the special I/O Shields available.
-
If none of the back windows offered
is suitable, this chassis could be used without
back window and no PCI card.
-
Check the position of the PCI slot to
make sure it is properly aligned with the Mainboard slot.
-
Optional Flexible
32bit Riser Card may solve PCI slot alignment problems.
