-
1U 19" rackmount,
Beige or black.
-
Thick and heavy coated metal. Laser cut
high quality production.
-
1 x slim 5.25" bay, 1 x slim 3.5" bay
(with IDE converters).
-
4 x IDE Swappable HDD bays with key lock.
-
4 x EIDE Swappable Backplane.
-
1 x 32Bit PCI riser card included. Ask
for other type of riser card (64Bit, Flexible riser card).
-
5 efficient thick 4cm fans included
-
With 250W PSU ref P1G-6250P from Zippy. 20pin,
4Molex, 2Floppy.
-
Kit box Includes 2 Molex splitters with 1 Floppy
adaptor and 2Molex splitters with 3Fan adaptors. Ask for additional connectors.
-
Takes Micro ATX and ATX boards (NOT
Extended ATX boards).
-
Full set electro-plate anti-rust
processing.
-
Meet CE, FCC requirements.
-
Optional Rail set for installation in
cabinet.
-
Limited type of Back Windows available.
-
This chassis is too low
to take the standard 4.5x16cm I/O shield provided with Motherboards.
-
Check compatibility
between your Motherboard and one of the special I/O Shields
available (Pictured obove).
-
If none of the back windows offered
is suitable, this chassis can be used without back window and no PCI
card.
-
Check the position of the PCI slot to
make sure it is properly aligned with the Mainboard slot.
-
Optional Flexible
32bit Riser Card may solve PCI slot alignment problems.
