|
Expansion slots ‘Holder’
-
To remove the expansion slots ‘Holder’, ease back the holder from the
rear panel by pressing down ‘d’ with the thumb and then lifting up ‘e’
with the index finger from the protruding ‘Stopper b’ on the rear panel.
Ease out the holder (Diagram 4&5).
-
To secure the holder, place the lower-end of the holder into the ‘a’
position on the rear panel (Diagram 5) and gently press back the holder
onto the ‘Stopper b’.
WARNING!
It is highly recommended to add the
‘Transportation Screw’ at ‘c’ (Diagram4) to prevent damage during
hazardous transportation conditions.
|
