|
600W Power Supply
FX600 GLN |
|
 |
Features
- Supports the latest Intel ATX 2.0 standard.
Improve the System Compatibility
- Supports
ATI Crossfire &
nVidia SLI VGA Card Double +12V Design.
- Supports the latest AMD 64 CPU
- Conforms to WEEE & RoHS Environmental
Directives in Europe
- Extremely low noise design, providing
consumers with a quiet, good operating environment
- Ultra high power of 600W, providing the super
player enough power to ensure a stable system
- Over voltage protection, over current
protection, and short circuit protection can protect each part of
the computer.
- High quality blue cover coating
- 12 cm light blue fan, enhancing heat
dissipation and reaching the minimum noise requirement
- Neat and tight mesh sleeving improves the
ventilation.
- Smart Housing easy plugable D-type molex connector
design.
- Cellular air intake to lower noise and
enhance air flow.
- Honeycombed cooling vents on the case reduce
noise and improve the heat dissipation and air flow.
- Connectors: 2 x 6 pin PCI Express, 6 x Easy
to pull Molex (CD ROM...), 2 x Floppy, 6 x SATA, 1 x 4+4 pin 12
volts(ATX or
EPS), 1 x 8 pin 12V, 1 x 20+4 pin Board connector. Cable lenght: 50 to 100cm.
Specifications
- AC Full Range Input is applicable throughout
the world.
- High efficiency and power saving design >85%
- Independent 4 Channel 12V Input design.
Provides stable power.
- 0.99 Active PFC. Improves the rate of power
utilization.
- 20+4Pin Connector designing compatible to all
motherboards in the market.
- 4+4Pin 12 volts connector design, complying with the
requirement of CPU for ATX or EPS system
- SATA Connector design which supplies high
transfer SATA interface products with stable power
- 2 Channel PCI-E Connector with ATI & nVIDIA
dual graphic card support
- 8 Pin 12V which supports dual CPUs and
supplies stable voltage.
- MTBF:100,000 hours
Output
|
Output Voltage |
Min. load |
Max. load
|
Load Reg. |
Ripple
& Noise |
| +5V |
0.5A |
30.0A |
+-5% |
50mV P-P |
| +12V1 |
0.0A |
15.0A |
+-5% |
120mV P-P |
| +12V2 |
0.0A |
15.0A |
+-5% |
120mV P-P |
| +12V3 |
0.9A |
15.0A |
+-5% |
120mV P-P |
| +12V4 |
0.1A |
15.0A |
+-5% |
120mV P-P |
| +3.3V |
0.8A |
36.0A |
+-5% |
50mV P-P |
| -12V |
0.0A |
0.5A |
+-10% |
120mV P-P |
| +5Vsb |
0.0A |
2.0A |
+-5% |
50mV P-P |
|
|
+5V &
+3.3V total output is 155W max.
+5V & +3.3V & +12V1 & +12V2 & +12V3 & +12V4 total output not exceed
680W. |
| |
|
