-FSP250-50GUB.

-1U, Shuttle PSU 40x80x150mm.
-Brand: FSP.
-Voltage: 110/230V (Full range).

-2x12Volt rails.

-Certifications: All.
-Connectors: 20+4pin, 2Molex, 1Floppy, P4, 3SATA.

-Note:

-Active PFC, main cable is 23cm long. Ask for cable extensions if necessary.

-Some PSU like the AM630BS20S have an extra connector like a Molex but with no red wire for the motherboard. To replace it safely, just use a normal Molex with the red wire (Ask for an extra molex if required).

-This PSU, like all new PSU does not have the -5V white wire  which is now obsolete.

-The fan may not spin unless the PSU is hot, which makes it a quite and long lasting PSU.

-Some similar PSU have the fan at the other end which can in some rare cases be a problem with fitting brackets. Please check compatibility.

-Suitable replacement for: AM630BS20S, FSP200-50PLA, 9TPWR2004A, Merit EC7536-01 & more...(check compatibility list).

-1Pc at £34 each / 10Pcs at £32 each

 

Technical sheet:

-8 x Retail Pack PSU.

-Standard PS2 PSU 140x85x150mm.
-Brand: Fire Bull.
-Voltage: 230V.

-Certifications: TUV, CE, CB, Gost-R.
-Connectors:

    FB300-60FS: 300W, 20+4pin, 4Molex, 1Floppy, P4, 1SATA.

    FB350-70FS: 350W 20+4pin, 4Molex, 1Floppy, P4, 1SATA.

    FB400-80FS: 400W, 20+4pin, 4Molex, 1Floppy, P4, 2SATA, 6pin PCI-E

    FB450-80AC: 450W, 20+4pin, 2Molex, 2Floppy, P4, 2SATA.,6pin PCI-E, 8pin EPS

-8 retail boxes per lot.

-Ideal for shop display.

-Each retail box includes a Warranty Card from manufacturer Fire Bull.

 -Distribute this PSU and let Fire Bull deal with your customers returns directly (After 7 days from date of purchase).

-Fire Bull PSU.

-Standard PS2 ATX 85x150x140mm.

-Brand: Fire Bull.

-Voltage: 110/230V (Switch).

-Certifications: CE, CB, TUV, GOST-R.

-Connectors: 20pin, 4Molex, 2Floppy, P4, Auxiliary ATX.

-350W: FB300-70FS

-400W: FB400-80FS

-Generic 300W.

-Standard PS2 ATX 85x150x140mm.
-Brand: FSP or Fire Bull.
-Voltage: 230V.

-Certifications: CE, CB, TUV, GOST-R.
-Connectors: 20+4pin, 4Molex, 1Floppy, P4, 1SATA.

-Options: 1extra SATA adaptor.

-Generic 350W.

-Standard PS2 ATX 85x150x140mm.
-Brand: FSP or Fire bull
-Voltage: 230V.

-Certifications: CE.
-Connectors: 20pin, 6Molex, 2Floppy, P4, Auxiliary ATX.

-Options: 1extra SATA adaptor.

-Promo 400W.

-Standard PS2 ATX 85x150x140mm.
-Brand: Fire Bull.
-Voltage: 230V.

-Certifications: All.
-Connectors: 20+4pin, 6Molex, 2Floppy, P4.

-Options: 2SATA & 6pin adaptors.

-FB-450W.

-Standard PS2 ATX 85x150x140mm.
-Brand: Fire Bull.
-Voltage: 230V.

-Certifications: CE.
-Connectors: 20+24pin, 6Molex, 2Floppy, P4, 2SATA, 6pin adaptor.

-Options: 12 volt 8pin connector for Dual CPU boards.

-ST-420BKP.

-Standard PS2 ATX 85x150x140mm.
-Brand: Seventeam.
-Voltage: 230V.

-2x12Volt rails.

-Certifications: All.
-Connectors: 20+4pin, 6Molex, 2Floppy, P4, 2SATA.

-Options: 6pin connector.

-Note: Sleeved cable for improved cable management. 12Volt DC socket.

-ST-550EAG.

-Standard PS2 ATX 85x150x140mm.
-Brand: Seventeam.
-Voltage: 110/230V (Full range).

-2x12Volt rails.

-Certifications: All.
-Connectors: 20+4pin, 6Molex, 2Floppy, P4, 2SATA, 2x6pin, 1x8pin.

-Note: PFC, easy grip Molex, sleeved cables, 2fans.

-ST-1000E-AD.

-Long ATX 85x140x220mm.
-Brand: Seventeam.
-Voltage: 110/230V (Auto range).

-4x12Volt rails.

-Certifications: All.
-Connectors: 24pin, 6Molex, 1Floppy, P4, 9SATA, 2x6pin, 2x8pin.

-Note: Active PFC, 80+, SSI EPS 12V Version. 2.91, easy grip Molex, sleeved cables, retail pack, Supports Dual Core Nocona.

-FSP275-50BWN.

-CFX PSU 85x150x95mm.
-Brand: FSP.
-Voltage: 230V.

-2x12Volt rails.

-Certifications: All.
-Connectors: 24pin, 2Molex, 1Floppy, P4, 1SATA.

-Options: 20pin, SATA, Wire extensions.

-Note: Wires are 22cm only but extensions are provided. The PSU has a volt switch set to 220V but it could be changed to 115V. The volt switch has a security cover which is slightly difficult to remove.

-Suitable replacement for: PS-275EH, ST-300CPD, MPT-C275 & more... (check compatibility list)

-FSP270-50SPV (PF).

-PS3 PSU 85x150x100mm.
-Brand: FSP.
-Voltage: 110/230V (volt switch).

-2x12Volt rails.

-Certifications: All.
-Connectors: 24pin, 4Molex, 2Floppy, P4, 1SATA.

-Options: 20pin, extra SATA.

-Note: This PSU is a shorter version of standard PS2 PSU used in chassis with limited depth.

-Suitable replacement for: ATX-1956, FSP145 60SP & more...(check compatibility list).

-FSP250-50PLB.

-1U, Shuttle PSU 40x80x190mm.
-Brand: FSP.
-Voltage: 110/230V (Full range).

-Certifications: All.
-Connectors: 20pin, 3Molex, 1Floppy, P4

-Options: 24pin, SATA, 6pin adaptors.

-Note: Active PFC, 80+, noise killer,  main cable is 50cm long.

-FSP300-60GLS.

-SFX PSU 63x125x100mm.
-Brand: FSP.
-Voltage: 110/230V (Full range).

-2x12Volt rails. 80+

-Certifications: All.
-Connectors: 20+4pin, 3Molex, 1Floppy, P4, 1SATA.

-Option: SATA, 6pin adaptors.

-Note: Active PFC, 80+, noise killer.

-Some similar PSU have the fan sitting on top rather than inside the casing.

-Suitable replacement for: ATX-1523F, ST-250MAC, HEC-200FC & more...(check compatibility list).

-FSP180-51NI.

-SFX PSU (63+12)x125x100mm.
-Brand: FSP.
-Voltage: 230V.

-Certifications: All.
-Connectors: 20pin, 3Molex, 1Floppy, P4.

-Option: 24pin, SATA.

-Note: This PSU has the power inlet on the small side (63x100mm).

-Suitable replacement for: ENP-8156903, HCP15010, ATX93 3405, ENP2120A, ENP1215A, ENP2125A & more... (check compatibility list).

-MPT-135.

-Flex PSU 63x82x150mm.
-Brand: Macron.
-Voltage: 110/230V (Volt switch).

-Certifications: CE, TUV, FCC, RU.
-Connectors: 20pin, 2Molex, 1Floppy.

-Options: 24pin, P4.

-Note: Fitting with 2 screws.

-SFX PSU.

-SFX PSU 125x(63+12)x110mm.
-Brand: Astec or Fire bull
-Voltage: 230V

-Certifications: CE, TUV, D.
-Connectors:

   90W PSU (ATX93-3415) : 20pin, 3Molex, 1Floppy, (NO 4pin P4)

   300W PSU (FB-300 (SFX)): 20+ 24pin adaptor, 3Molex+1SATA adaptor, 2Floppy, Auxiliary ATX, P4

-Note: Same size as FSP300-60GLS but with fan on top.

-ST-250TPD-02F.

-TFX PSU (61+4)x85x175mm.
-Brand: Seventeam.
-Voltage: 230V.

-2x12Volt rails.

-Certifications: All.
-Connectors: 20+4pin, 2Molex, 1Floppy, 1SATA, P4.

-Options: 6pin PCI Express adaptor.

-Note: Some similar PSU have a non standard extra connector for an LCD display or LED at the front of the PC (Philips PCs). Our standard TFX PSU does not have it.

-Suitable replacement for: ENP-2224B, FSP250-50SAV, FSP160-60SAV & more...(check compatibility list).

-FSP200-60SAV (PF).

-TFX PSU (61+4)x85x(175+63)mm.
-Brand: FSP.
-Voltage: 230V.

-Certifications: All.
-Connectors: 20pin, 2Molex, 1Floppy, P4.

-Options: 24pin, SATA.

-MPT-350(PL01).

-Low profile ATX PSU 120x85x155mm.
-Brand: Macron.
-Voltage: 115/230V.(Volt switch).

-Certifications: All.
-Connectors: 20+4pin, 6Molex, 1Floppy, P4, 2SATA.

-Options: 6pin PCI Express adaptor.

-Note: PSU used in slim line ATX desktops.

-Suitable replacement for: ADT-300, ADT-300, MPT-A230 & more...(check compatibility list).

-SPI-300G.

-AT PSU 85x150x140mm.
-Brand: FSP.
-Voltage: 110/230V (Volt switch).

-Certifications: CE, FCC, TUV, RU, CSA.
-Connectors: P8+P9, 4Molex, 2Floppy.

-Note: PSU for old AT technology.

-ARH-6300F.

-Big redundant PSU 95x335x190mm.
-Brand: ZIppy Emacs.
-Voltage: 110/230V (Volt switch).

-Certifications: All.
-Connectors: 20pin, 15Molex, 2Floppy.

-Options: 24pin, 2SATA, P4, 6pin.-Note: Hot swap with visual and sound alarrn when one PSU fails.

-MRT-6320P.

-Mini Redundant PSU 85x150x185mm.
-Brand: Zippy Emacs.
-Voltage: 110/230V (Full range).

-Certifications: CE, FCC, TUV, RU.
-Connectors: 20+4pin, 6Molex, 2Floppy, P4, Auxiliary ATX.

-Options: 2SATA, 6pin.

-Note: Hot swap with visual and sound alarrn when one PSU fails. Fits our chassis EYE4800, ECR9400, 9008, ECS5000.

-TC-300R.

-Big redundant PSU 219x153x174mm.
-Brand: I-Star.
-Voltage: 110/230V (Volt switch).

-Certifications: All.
-Connectors: 20/24pin, 12Molex, 2Floppy, P4, 2SATA.

-Note: Hot swap with visual and sound alarrn when one PSU fails.

-Molex to SATA PSU adaptor.

-10cm long.

-20/24 pin PSU adaptor.

-20pin PSU to 20pin motherboard extension (19cm long).

-24pin PSU to 24pin motherboard extension (13cm long).

-20pin PSU to 24pin motherboard adaptor (19cm long).

-24pin PSU to 20pin motherboard adaptor (14cm long).

-SFX to PS2 PSU bracket.

-Fit a small SFX PSU where a standard PS2 PSU would normally go.

-Allow more room and better ventilation in the chassis.

-Metal bracket (PSU pictured not included).

-6Pin PCI Express adaptor.

-2Molex to 6Pin PCI Express adaptor.

-21cm long.

-Molex Splitter + Floppy adaptor.

-1Molex to 2Molex adaptor.

-14cm long.