This FB250-60NAS is a replacement PSU for some Netgear ReadyNAS boxes.
It has an
improved ventilation and a single special 20pin connector.
Note:
-Our PSU
replaces the original ST220FUB, FSP200-50PLA especially designed for the
above PCs.
- This PSU is
NOT compatible with standard ATX computers. This is because the 20pin
connector pin out has been designed especially for the 4 computers mentioned
above.
-This item
includes the Power supply unit alone. It DOES NOT come with the tray.
-This
PSU comes with a fitting bracket and a special 20pin connector. It has NO
other connectors.
-Unlike the original, this PSU is not fanless.
It has a quite 40mm fan and extra vent holes on both sides for an improved ventilation
(no need to use the transparent plastic shield on our PSU).
-It is more powerful for a better upgradeability &
system stability.
-It has high quality components, is very reliable and has an extremely low
failure rate.
-The vent holes near the power socket are blocked when installed but the
additional large vent holes on the side is sufficient to compensate.
-Some ReadyNAS 1100 may require the power socket to be
orientated the other way round. Please let us know in the remark box at
check out if this is required. See illustration bellow:
-See
how to remove the PSU from your ReadyNAS box here>>:
